1. #1
    Unregistered

    How to create local area network connection using switch in windows 7 ultimate?

    Hi friends can anyone tell me what is switch and how can I create a local area network using switch with windows 7 ultimate?



  2. #2
    belide Array
    Join Date
    May 2012
    Location
    Hyderabad
    Posts
    610

    Re: How to create local area network connection using switch in windows 7 ultimate?

    In order to Connect Two PC's together we need Switch or Hub. So, Switch is defined as to connect two or more Computers to connect to each other.

    These Switch or Hub is User Friendly. They do care about the Configuration of the Devices. While Connecting PC's with the help of Switch, you should be careful about the Cable Crimping and IP Address.

    Recommended Cables are RJ45 and UTP Cables.

    Crimping of Cables:

    This is how it looks when Computers are Connected through Switch.

    935290_f520.jpg

    Standard Colour Codes of RJ45 should be be followed carefully. In Normal Connection it, directly goes to the respective Colour Code, but it is difficult in Cross Over Connection.

    935316_f248.jpg

    RJ45 of One Computer with the Standard Colour Code should be connected to the RJ45 of another Computer of the same Colour Code. So, no change is to be made.

    935300_f496.jpg

    Crimping of Cables is to be done carefully. With this Crimping of Cables is done i.e; Cable (RJ45) is connected from One Computer to another Computer with the help of Switch.

    935302_f496.jpg

    Assigning of IP Address:

    Now, assigning of IP Address should be done Carefully. IP Address of One System differs from the IP Address of another System. No two Systems can have the same IP Address. It should be Unique from System to System. Follow these Steps to assign the IP Address to the System.

    STEP 1: Open "My Network Places" and Select "Properties".

    913724_f260.jpg

    STEP 2: In the Properties Window, Under the Heading of "LAN or High Sped Internet" Select your "Local Area Connection".

    913763_f260.jpg

    STEP 3: Window titled "Local Area Connection Properties" will open. Select "Internet Protocol (TCP/IP)" and Click on "Properties" Button. This will give rise to "Internet Protocol (TCP/IP) Properties" Window.


    913776_f260.jpg

    STEP 4: In this Window, Select "Use the Following IP Address" Radio Button and enter IP Address as shown in the Picture.

    913778_f260.jpg

    STEP 5: Till now, we have successfully assigned the IP Address of one System (Server). In order to assign the IP Address to another Systems, it is same as the before till STEP 4.

    In this, you should change the IP Address as "192.168.0.2" and if one more System is to be Connected give it's IP Address as "192.168.0.3" and so on in the same Subnet Mask.

    913782_f260.jpg

    STEP 6: Check whether the Connection is done Perfectly or not. For that we use the "Ping" Command.

    Click Start Menu > type "Run" > type "Ping 912.168.0.1" from the Client System.

    935391_f520.jpg

    If every thing is good, above Screen should appear otherwise check tit form the beginning.

  3. #3
    homikohli Array
    Join Date
    May 2012
    Location
    Q. No. K1-8, Shaharpura, P.O.- Sindri, Dist- Dhanbad, Jharkhand Pin- 828122
    Posts
    25

    Re: How to create local area network connection using switch in windows 7 ultimate?

    If you're on a home network with a homegroup, and you're trying to connect to another computer, make sure that computer is on and that it has been added to the homegroup

    If you're on a home network without a homegroup, and you're trying to connect to another computer, make sure that computer is on and that you've enabled file and printer sharing on your network. For more information, see Networking home computers running different versions of Windows.


    Make sure that all wires are connected (for example, make sure your modem is connected to a working phone jack or cable connection, either directly or through a router).

  4. #4
    wannapoints Array
    Join Date
    May 2012
    Location
    Patna
    Posts
    218

    Re: How to create local area network connection using switch in windows 7 ultimate?

    Windows provide very easy tool for getting connected on LAN.
    For connection just do following things:-

    1. Connect your all the computer that you want to connect with Router with
    the help of Cable.
    2. Then go to open network sharing center.
    3. There click on "set a new connection or network"
    4. A new windows will be open click there on setup a new network
    4. Then a new pop up will be open, that will search your Router
    5. Select your router and click on next
    6. Your connection will be connected
    Do same process with all the computer

  5. #5
    Mantu Pandit Array
    Join Date
    May 2012
    Posts
    305

    Re: How to create local area network connection using switch in windows 7 ultimate?

    Dear,

    Window 7 provide he simple and the easy tools to create the LAN setting
    1. Connect all the wires and the cables of the internet
    2. Click on the start Menu.
    3. Click on the "Set a new Connection or Network"
    4. Click on the New setup of network or set up a new network connection
    5. give or set your IP address
    6. Connection will be connected to the computer
    7. Reboot the computer and then connect the internet.

  6. #6
    Sumit06101987 Array
    Join Date
    May 2012
    Posts
    68

    Re: How to create local area network connection using switch in windows 7 ultimate?

    For connection just do following things:-
    1. Connect your all the computer that you want to connect with Router with
    the help of Cable.

    2. Then go to open network sharing center.

    3. There click on "set a new connection or network"

    4. A new windows will be open click there on setup a new network

    4. Then a new pop up will be open, that will search your Router

    5. Select your router and click on next

    6. Your connection will be connected

    Do same process with all the computer

  7. #7
    kapil Array
    Join Date
    May 2012
    Posts
    465

    Re: How to create local area network connection using switch in windows 7 ultimate?

    First two thing you need is
    1. UTP cable (connect all computer with it )
    2. Connect man computer with the network.
    After this
    go to control panel>network and sharing center>change adapter setting>LAN (right click on it )>properties>TCP/IP option(double click on it. Then fill all requirement . Then click "Ok" .

  8. #8
    mobeshpal Array
    Join Date
    May 2012
    Posts
    96

    Re: How to create local area network connection using switch in windows 7 ultimate?

    Window 7 provide he simple and the easy tools to create the LAN setting
    1. Connect all the wires and the cables of the internet
    2. Click on the start Menu.
    3. Click on the "Set a new Connection or Network"
    4. Click on the New setup of network or set up a new network connection
    5. give or set your IP address
    6. Connection will be connected to the computer
    7. Reboot the computer and then connect the internet.


    good luck............

  9. #9
    milan padariya Array
    Join Date
    Jun 2012
    Posts
    221

    Re: How to create local area network connection using switch in windows 7 ultimate?

    If you're on a home network with a homegroup, and you're trying to connect to another computer, make sure that computer is on and that it has been added to the homegroup

    If you're on a home network without a homegroup, and you're trying to connect to another computer, make sure that computer is on and that you've enabled file and printer sharing on your network. For more information, see Networking home computers running different versions of Windows.


    Make sure that all wires are connected (for example, make sure your modem is connected to a working phone jack or cable connection, either directly or through a router).............................................

  10. #10
    jav.aditya Array
    Join Date
    Jul 2012
    Posts
    298

    Re: How to create local area network connection using switch in windows 7 ultimate?

    Hello,

    1.Click Start and,then click Control Panel.

    2.Under Network and Internet,click Choose Homegroup and sharing options .

    3.In the home group settings window,click Change advanced sharing settings .

    4.Turn on network . Review the other settings and turn them on or off.


    Thanks!!!!!!!!!!!!!1

+ Reply to Thread

Similar Threads

  1. Replies: 45
    Last Post: 19-09-2013, 08:21 PM
  2. Replies: 13
    Last Post: 03-12-2012, 07:10 PM
  3. Replies: 7
    Last Post: 03-12-2012, 07:04 PM
  4. Replies: 3
    Last Post: 29-09-2012, 03:10 PM
  5. Replies: 5
    Last Post: 04-09-2012, 10:30 PM