Reply to Thread

Re: nserting windows 7 Bootable DVD but the computer redirects me to Windows Boot Loader screen which shows Windows Failed to Start

Hello friend ,

Before booting you have to check your disk i think it is a corrupted disk that's why window is unable to load it.

If you want to install window 7 through usb than you have to make your usb boot-able by following process :

- Open the command prompt
- Diskpart
- List disk
- Select disk
- Clean
- Create partition primary
- Select partitiion
- Active
- Format fs=fat32 quick
- Assign
- Exit

NOW YOUR DISK IS A BOOT-ABLE DISK AND COPY THE WINDOW FILES AND BOOT IT USING F12 AND INSTALL WINDOW 7 EASY AND FASTER.

GOOD LUCK....!!!

Re: nserting windows 7 Bootable DVD but the computer redirects me to Windows Boot Loader screen which shows Windows Failed to Start

IF you are facing this type of problem then use these steps:-
-At the restart press delete 4-5 time so that you will enter in the bios setup.
-now in bios setup go to boot devices.
-select you cd/dvd rom as the primary boot device.
-save and restart your laptop.
Now your fresh windows installation should be started.

But if you again facing the same problem means Either your windows DVD is not working properly.
- for that try another bootable windows dvd of your any friend.

IF another dvd is also not working then there is problem in your hardware, then go to service center.

nserting windows 7 Bootable DVD but the computer redirects me to Windows Boot Loader screen which shows Windows Failed to Start

I have purchased an Acer Laptop with a bootable windows 7 DVD and thus trying to install windows 7 strictly according to the steps given in Manual. According to the manual, Insert the windows 7 DVD, click on f12 and then choose “Boot from cd/dvd” but I am not getting this screen. Instead it redirects me to a screen which shows Windows Failed to Start. Do you have any Idea, what is happening? Is there any solution for the same?