I have inserted a DVD into the DVD ROM of my Windows XP machine, after the DVD is inserted nothing comes on the screen, earlier I used to get the window with a list of options like Open Contents, Copy DVD, etc,. but now nothing is shown. When I open the disc drive in windows explorer, it says insert a disc.
Related Windows Problems:
- Windows 7 not recognizing the inserted CD/DVD.
- DVD/CD-ROM drives not appearing under Device Manager on Windows 7 System.
- Windows 8 not detecting DVD ROM
- DVD-ROM stopped working after reinstalling Windows 7.
- Windows 7 not recognizing blank CD inserted into DVD drive
- DVD/CD ROM Drive on Windows XP canÂ’t read DVDs
- Windows Vista operating system not recognizing DVD
- "Files should be copied to DLL Cache." after inserting any CD/DVD on Windows XP.
- DVD is not read in Windows Vista
- CD/DVD is not found in Windows Vista System
Hello,
You should first check the CD/DVD to find out wheather the CD/DVD is ok and there is no mark on it.
If the CD/DVD is fine then it's time to check the DVD drive of your PC. You should remove the DVD drive
from the PC and clean the dustin it. Now, insert the DVD drive with all the cables and turn on your PC. Now,
insert a CD/DVD to the drive and wait. If the DVD drive read the CD/DVD then you will see auto run. Other wise
you should take your DVD drive to a service centre.
Bye,
What has happend to your system that it has lost its device driver for the DVD/CD drive somehow.Installing the driver can solve the problem for sure, provided the Optical Drive is not physically damaged.First uninstall the existing driver from the system,click Start--Control Panel--Syatem And Maintanance--System--Hardware--Device Manager--Dvd/Cd Rom--devices--Uninstall.Exit and windows will automatically assign another driver for the decice and solve the issue.
Hi friend,
The problems might be the following:-
1. Either your DVD ROM might not be working.
2. Or the connection might be lost inside your cpu.
3. Or your DVD ROM drivers might be crashed.
To overcome the above issues do the following:-
1. Check whether you see the light glowing when you insert a disk, if light glows then your DVD ROM is working.
2. If you dont see any light then check for the connection inside your CPU.
3. Try re-installing the DVD ROM Drivers.
Hope i have helped you in getting relevant information.
All the best
Thanking you...
My dear friend if you are trying to load a DVD on your computer and it is not picking it up then it clearly means two things.One is that either the optical reader of your computer has been damaged.And the other thing is that maybe the DVD is empty or to much scratched for your system to recognize it.Now here is what you should do,
1.First try to insert any other disk in your computer and see if that works. Because if this doesn't work still then it means that the optical reader is surely damaged and you are gonna have to repair that thing.
2.If the other disc works fine on your computer then it clearly means that the DVD that you are trying to play is damaged and you should buy a new DVD for that purpose.
Good luck!!!
Hello friend,
I have the solution for your problem just do as i say........
1.Firstly check that you have connected your DVD drive correctly.
2.if that is not your problem then the problem is with the DVD drive drivers.
3.So you go to the Device manager.
4.Then open the DVd driver properties.
5.Move to the Driver tab and then update the driver.
Have a nice day.....................
Hello,
1. First of all Check out that CD/DVD is working properly or not.
2. If it is working, Then check the Cables and connections inside the PC are properly placed or not.
3. Some times due to loss of Device drivers also it may not work properly.
4. Reinstall device drivers of CD/DVD driver.
This may help you to fetch the problem......
>>>>>>>>>>>>>>>>>>>> THANKS<<<<<<<<<<<<<<<<<<<
hello friend
your solution is
>>check your cd/dvd
>>if cd/dvd is fine open your pc and check your dvd drive connection cabal.
>>open start
open control panel
open administrative tools
open computer managment
go device manager
select cd/dvd-rom drivers
you will show driver
right click on driver
select update driver.
and restart your computer.
i hope this is usefull for you.
Hello my dear friend ----------------
To resolve the steps follow the below steps then hopefully it will solve your problem
Before get into the Actual process then you Should log in as Administrator
Then Go to the "Device manager "and "uninstall " the DVD player as well as CD driver
Now Shutdown your system and " Restart " pc
Finally Go to connect the IDE cables after Booting of the system
from their Go to the "Device manager " and check the "DVD/CD " players and it should work properly
That is all Finally your problem be solved
GOOD LUCK
F
Hello Friend,
Its very simple,
Your system facing the driver problem in CD-ROM,
First of all please go to the control panel and open the system and security,
After this open the device manager and update the CD-ROM driver,
Then after update restart your system,
Now insert the disc and normally use,
I hope this information usefull to you,
Thanxx,
Hi, Dear friend
Generally the Above error Occurs whenever the Drivers of CD/DVD drive Crashed ....
So, First of all try to Restore it ... to check if it helps........and if it not Helps.... simply Re-install the drivers to Get the Solution
and for the Restoring of Drivers try to follow these steps:
press, Windows key+R and type regedit and click OK and now click YES if prompted
and now Go this address HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
then at the right pane choose Upper Filters ... ... and now go to Edit menu from the top of the Window .....and click on Delete option
and again choose Lower Filters ... and delete it
after that Close the Registry Editor .....and Restart the PC
after that Try again ... and if you are unable to solve the issue cases.... re-install the Drivers
ALL THE BEST!!!!!!!!!!!!!!!!!!!!!
Reply With Quote